SRAM AXS Mobile
Welcome to the feedback portal for SRAM AXS App. We want to hear your feedback!
- We will email you with updates on your feedback and/or requests.
- You can change your preferences in Settings if you would not like to be contacted.
223 results found
-
MicroAdjust Per Cog
Not all bikes are perfect 100% of the time. MicroAdjust per gear would help seamless shifting on nonperfect or slightly damaged setup, specially on the fly.
PLEASE DO THIS.
128 votes -
Hello Sram, I have a fantastic idea! Make it possible to adjust each cog in axs system! Sounds smart, right?
Lots of axs users are battling with this problem.. you know it... this problem's been existing from the very beginnings of launching axs. We need the option in the app to microadjust separately each cog for finetuning... No need to talk more, you know this stuff... Just solve this problem, do not respond with foolish justification... We've read them... ridiculous, very impolite and disrespectful... Just do it, thank you.
5 votes -
Force AXS Rear derailleur - stop working
I updated my Force Etap AXS on January 19, 2023, to firmware 2.41.0. I used the bike normally on the 21st, but today when I went out to ride the rear derailleur was not working. I thought it was the battery but after replaced it the problem continues. When installing it the derailleur light stayed ON and remained without working. I also couldn't connect it with the AXS App.
After doing a search on the internet I saw that I should remove the battery, hold the button and install the battery again, this way it would connect to the APP.
…
13 votes -
Rear derailleur
Rival rear derailleur stop working
Have got same problem yesterday everything was working well today rear derailleur stop working. Yellow led is blinking . Removed battery push buttom putted battery start update. Everything should work well but is not working. Some know what is going on? Yellow led is blinking….update was done…7 votes -
Left shifter new battery
All of a sudden my left shifter battery indicator in the axs app displayed as low charge despite showing as full charge days before. I put in a new cr2032 battery but in the app left shifter is greyed out and won't shift.
2 votes -
Force AXS on sequential changes up from large to small chainwheel
My Force AXS shifts from large to small chainwheel when moving from gear 2 to the largest cog (1). I would like it to do this between cog 4 and 3 as this would be more useful for shifting to further low gears plus it will ensure a better chain line ie less crossed than large chainwheel to cog 2 and 3.
9 votes -
AXS app 'wheel profiles' allowing derrailleur indexing settings to be stored against a wheelset
Like many riders, my gravel bike is something of an 'all bikes', serving as both gravel and road bike, differentiated by a change of wheelset and pedals.
Both wheelsets are from the same brand, and both rear wheels use identical XPLR Force cassettes. However, every time I swap them over I need to do some trimming of the derailleur to align it.
Whilst this task is not overly arduous, a simple solution is to allow the user (via the AXS app) to create and store wheel profiles which remembers derraileur positions for any given wheel. Simple analogy would be like…
7 votes -
AXS Rear Derailleur Micro Adjust Profiles
Make an option that you can create an AXS rear derailleur profile where you save the specific micro adjust settings.
For example when you switch wheelsets with similar cassettes (going from 10-28 to 10-30) some minor micro adjusting might be needed to achieve the most optimal shifting.
It will be good that you can save those profiles based on the cassette/wheelset, and then you can easily choose your profile and the rear derailleur will remember your last settings for that specific cassette/wheelset combination, eliminating the need to micro adjust every time.55 votes -
Specific bike should automatically show per event/ride.
When an event/ride comes into the SRAM App it should match with the bike and list it that way. Why do I have to manually select my bike per event/ride?
5 votes -
Answer posted issues
Here’s a suggestion… someone should be answering issues posted….
2 votes -
Don’t change the cassette data used in past activities
I bought another wheel set with different cassette/cog and noticed that all my past activities with 10-36 cassette changes when I select new 10-28 cassette.
This is really a mess and makes my record inaccurate and meaningless.
Ideally, I would like to have multiple cassette profile in the future but, if not, please distinguish the profile in the past activities and current setting on the bike. I think this is not a difficult thing to do.6 votes -
Reverb controller firmware update failed causes it to be unusable
The connection with the controller is very unstable. I began to update firmware and it seemed hung for at least 15 minutes. After canceling it now has a flashing orange LED and can no longer be used. It also cannot be found by the app. I have a race this weekend and an unusable dropper. Any help is appreciated
1 vote -
Battery Level notifications in the app
Battery Level notifications should occur as notifications in the app. That is, I'd like to know when the battery level reaches 20% and again at 10%, and 5% on the notifications list (like unread messages .
109 votes -
Merge AXS mobile and AXS web
AXS Mobile works okay - AXS Web does not. Why is the Mobile App redirecting to a wrapped web page of AXS Web for basic functions like viewing your ride data?
Having two separate platforms for one system is a mess. Merge the two into a proper Mobile App.54 votes -
Notify through app notifications that a firmware update is available
Just like unread email messages shows a notification on my phone, I should get a notification when a new firmware version is released.
99 votes -
Make possible the AXS micro adjust in the app when using wireless blips
Since the wireless blips makes possible to remove the shifter from the bike, would be nice to habilitate the micro adjust feature in the app.
7 votes -
An easy integration of the SRAM AXS in the Garmin platform
An easy integration of the SRAM AXS in the Garmin platform would be nice. Specially in the statistics, so you can see shifting characteristic per track and per performance. Maybe also integrate micro adjustments from the Garmin dashboard so an adaptation can be made while riding ...
19 votes -
Theft deterrent gear lock
I currently ride a 2022 Specialized Aethos equipped with a SRAM Rival gear set. I’m proposing an update to create a software feature that allows you to lock the drivetrain in whatever your current gear is.
At times I’ll stop on a ride to use a restroom or drop into a store. And rather than carry a lock I generally put the bike in the highest gear so that if anyone tried to ride away, they would have a difficult time gaining speed. It would be great if the shifter programming allowed me to lock it into whichever gear I’m…29 votes -
allow the user to set a tone to chime based on shifting into a chosen gear or gears
I'm not always positive if I'm in the lowest gear. If I had the ability to have my phone make different tones while shifting to different gears, I could set my phone to "ding" when in the second to lowest gear, letting me know that I have one more downshift remaining
1 vote -
Multishift - add a option for multishift to be 1
Allow mutlishift to be 1 on either up or down. For people who only want to multishift one way.
3 votes
- Don't see your idea?