SRAM AXS Mobile
Welcome to the feedback portal for SRAM AXS App. We want to hear your feedback!
- We will email you with updates on your feedback and/or requests.
- You can change your preferences in Settings if you would not like to be contacted.
227 results found
-
Don’t change the cassette data used in past activities
I bought another wheel set with different cassette/cog and noticed that all my past activities with 10-36 cassette changes when I select new 10-28 cassette.
This is really a mess and makes my record inaccurate and meaningless.
Ideally, I would like to have multiple cassette profile in the future but, if not, please distinguish the profile in the past activities and current setting on the bike. I think this is not a difficult thing to do.6 votes -
Configure your e-shifters to operate all e-derailleurs using the App.
1x and 2x Gravel bikes are pushing the limits of gearing. If SRAM were to design ANY lever or trigger shifter to operate ANY wireless derailleur you would open up so many possibilities for bike configuration. In doing so SRAM would demonstrate its market leadership and create demand for its products.
1 vote -
Force AXS on sequential changes up from large to small chainwheel
My Force AXS shifts from large to small chainwheel when moving from gear 2 to the largest cog (1). I would like it to do this between cog 4 and 3 as this would be more useful for shifting to further low gears plus it will ensure a better chain line ie less crossed than large chainwheel to cog 2 and 3.
11 votes -
Multishift - add a option for multishift to be 1
Allow mutlishift to be 1 on either up or down. For people who only want to multishift one way.
3 votes -
Change between sequential and compensating
Allow the change between sequential and compensating using a long press on the button on the back of the shifter.
short press turns enhanced mode on/off
long press changes between sequential and compensating2 votes -
1 vote
-
No reponde la aplicación
Hola la app no responde
1 vote -
Force AXS Rear derailleur - stop working
I updated my Force Etap AXS on January 19, 2023, to firmware 2.41.0. I used the bike normally on the 21st, but today when I went out to ride the rear derailleur was not working. I thought it was the battery but after replaced it the problem continues. When installing it the derailleur light stayed ON and remained without working. I also couldn't connect it with the AXS App.
After doing a search on the internet I saw that I should remove the battery, hold the button and install the battery again, this way it would connect to the APP.
…
13 votes -
Cambiata automatizzata
Non utilizzare il comando remoto ma facendo cambiare autonomamente alla App o IQ Garmin dopo aver impostato il parametro cadenza o velocità o potenza.
1 vote -
The SRAM AXS Mobile App advise me to update my SRAM Rival FD to 2.32.0 but when it was updated successfully according the results
After updating the SRAM-Rival FD thru firmware 2.32.0, SRAM FD can be recognized anymore. Can someone help me on this.
1 vote -
Make possible the AXS micro adjust in the app when using wireless blips
Since the wireless blips makes possible to remove the shifter from the bike, would be nice to habilitate the micro adjust feature in the app.
7 votes -
Minimalist Apple Watch app
I would like to have a companion Apple Watch up to enable viewing current gear position(s) and battery level(s) of components. A bonus would be the ability to change microadjust settings from the watch via voice!
4 votes -
Software "lockout" of specific cogs or lower range 12 speed cassette
I've had multiple people who want Eagle AXS but do not like the jump to the 50 tooth cog on the cassette. It would be great to be able to do a "lockout" so that the derailleur will go no further than the 11th cog. I suppose it could be done with a limit screw but that would likely cause damage to the derailleur.
Alternatively, offer a SRAM-branded 10-45 or 9-45 12 speed cassette.
1 vote -
Mtb shifter and blips simultaneously
Mtb shifter and blips simultaneously, so I can shift with my hands on my MTB grips (normal) or when my hands are inboard on my bar, near the stem (long roads trying to get more aero). There is an admin post from Mar 2022 that says it's possible with road shifters and blips. It doesn't work for my MTB, though:
Both work by themselves.
Gx rd firmware up to date in the SRAM app, 2.19.5.
Blipbox firmware up to date in the SRAM app, 2.29.6; all ports configured in app for up or down shift
Axs controller (MTB shifter) firmware…2 votes -
I want to stay signed in to the app. Currently I have to log in every time. Is there a way to bring that back please!
The app used to keep me signed in. Then it stopped and now I have to log in every time! Can we please get that back! Thanks
4 votes -
Compensating shift based on gear ratios
Provide a compensating shift option that would automatically shift to the cassette sprocket that provides the gear ratio closest to the gear ratio being used at the start of the shift. The number of compensation shifts would vary depending upon the gear being used at the start of the shift. For example, with a 30-43 crankset and a 10-33 cassette the number of compensation shifts would be 0, 1, 2, 3, or 4 depending upon the gear being used at the start of the shift.
1 vote -
JUST make it work
It’s impossible to change the settings of the controller on the handle bar by app !!!! It’s very disappointing After having changed the battery of the controller it returned in the standard settings and it is impossible to change them by app !!!!!
2 votes -
MicroAdjust Per Cog
Not all bikes are perfect 100% of the time. MicroAdjust per gear would help seamless shifting on nonperfect or slightly damaged setup, specially on the fly.
PLEASE DO THIS.
152 votes -
Yesterday, 21.07.2022, I baught a new bike. the installed SW was 2.7.6. The AXS Mobile App told me: an update 2.34.1 is available, please up
Yesterday, 21.07.2022, I baught a new bike. the installed SW was 2.7.6. The AXS Mobile App told me: an update 2.34.1 is available, please update. So I did. When finished Update says.: No succes. And now my bike does not function any longer. What should I do now? And why want AXS mobile want to update with a defektiv SW 2,34,1??? Shame on you. What a bad SW. And now my bike is defektiv and I coul not find a solution
7 votes -
all my rides displaying kj instead of kcal
all my rides displaying kj instead of kcal, for example yesterday
2.280 kJ instead of 544 kcal
1 vote
- Don't see your idea?