I would like the ability to adjust my derailleur via the app. I would also like to see current micro adjust position to see where the derai.
The AXS Mobile app will currently show trim and gear position in the Micro Adjustment screen (see attached screenshot). However the user is still required to adjust trim by holding the AXS button on the controller while initiating a shift.
-
Strength by Matteo Cresti commented
I have the exact same group (red axs etap 12v) on my bikes, in one everything works correctly, in the other it is impossible to configure the microadjusts via the app
-
fiberoptic@hotmail.com commented
I have a 2022 Trek Madone SLR Gen 6 and a 2023 Canyon Aeroad CF SLX. Both have AXS Force and had no micro adjust button in app. I had to update firmware (2.7.7 to 2.42.0) on all drivetrain components to get full features. See 2nd photo of MicroAdjust window in AXS app shows white up and down shift buttons. Range is 1 - 29. Default on Trek is 19. Default on Canyon 8
-
cutj@yahoo.com commented
If SRAM is not going to support changing the micro adjust from the app, they should remove reference of it from the documentation. I would greatly like to see support for it in the app.
-
nick.smith@cloudmaker.ai commented
Dear Admin, this feature request is not complete. The request is to be able to adjust the trim position via the app, not just see the info. This should be reopened!
-
aka.spin@gmail.com commented
hmm. why it's closed. the gear and shift is fine. but the request was to adjust derailleur.
-
tom0r@live.com commented
This would be incredibly usefull, especally when moving from a direct drive turbo trainer to the wheel and back again. Turning the pedal by hand and attempting to trim the microadjust by the levers can be a little tricky at times
-
bigdummysteve@gmail.com commented
Would it be possible to implement the trim function from the app? If possible it would make life much easier, one hand to turn the cranks and phone in the other adjusting the trim.
-
afcmorrison@gmail.com commented
Add the ability to perform Micro-adjust in the app. This would enable you to easily see how much adjustment you can make to each cog. This would be much easier than using the micro adjust on the shifters. This would be super handy when in the workshop
-
aka.spin@gmail.com commented
It's a pain to make 0.25 mm micro adjustments by shifters (press-hold-and-shift). Make this kind of changes from app will be very useful.
-
hkoolen12@gmail.com commented
Is it possible you insert a function in the app to trim the derailleurs sometimes in the front it will not go on the outside blade i think it is a matter of finetuning
-
graham@ingram-consultancy.co.uk commented
add fine tuning and adjustment of the rear derailleur to the app
-
Snake commented
It would be interesting that app will send u notification when derrailleur is not adjust.