Microadjust all gears one by one. Rear derallieur.
Would be a great feature for adjust micro shifts.
Simulating cable tension on an electronic shifter is crap…
Jonathan Marshall commented
Like other posters, I thought this is how the microadjustment feature worked before I bought the GX AXS system. My LBS even told me this is how it works. I was disappointed to see this didn't work out of the box.
My assumption is that you could still have a finite number of total "clicks" of adjustment for you to spread across all of the cogs as needed. I'd assume this was based on available memory in the rear derailleur.
That would be a great addition and a necessary feature to compare with latest Shimano 12 speeds groupset.
I too just purchased an AXS GX derailleur and figured the micro adjustment would be for each gear. I thought It would be pretty much a "no brainer" but I guess I was wrong.
A firmware update would be easy.
It's curious that the last time this subject was brought up and unfortunately shut down, it garnered enough votes to be in the top 10 posts on this forum/site. The admin's post was pretty naive. It's funny that other votes were not shut down in this fashion.
Please SRAM... You created this site for ideas to improve you product...listen to your customers!!!
If Shimano can offer micro adjustment for each gear, it should be a "no brainer".
T. Wehrmann commented
Eine Feinjustierung je Gang finde ich immer gut, da durch die 12-fach Schaltung es nie so ganz einfach ist eine Verstellung nachzujustieren. Man hat auch kurz vor den Rennen selten alle Hilfsmittel dabei, um das ganze System ganz genau einzustellen. Da ist es gut wenn man die Gänge hinten feinjustieren kann.
Johannes Paulick commented
Solltet ihr das Möglich machen, wäre auch ein verbogenes Schaltauge noch durch eine "Notlösung" zu retten.
Mit der Microadjustierung gäbe es keine Grund mehr Shimano Schaltwerke zu nutzen, weil die sind einfach Fehlerverzeihender.
Bitte folgt den Nutzern und die Nutzer werden euch folgen.
Absolutely necessary! As well as individual settings for „overshift“ on front mech…. Why running AXS when the customer has no access??? XD
No joke, it’s mandatory to dial in every last bit to perfection.
Yes it all works on properly installed systems and up to spec frames. But nether frames nor hubs nor chains nor the SRAM components ( aka RD with loosened up parallelogram axles … ) will hold up „true“ for the entire lifespan of any drivetrain!
It’s a bomber that SRAM did. reject the last request in such a user unfriendly manner!
Honestly I think it’s because they fear the use of „non SRAM“ cassettes if they add this feature because it would be easier to set them up - if customer wants to.
But imho it’s freaking me out. SRAM does an amazing job and no one needs Thirdparties on their bikes. It’s already a must on SRAM only Setups. So do it now !!!
Matheus Siqueira commented
Agree that this should be number 1 priority!
This is a great idea for when your chainset is in less than factory optimal condition.
SRAMs response to the last time this was raised, was beyond disappointing and showed a bewildering lack of awareness for real world conditions.
Do the right thing SRAM.
Great idea !
Great idea, that I had raised in the past 😊👍 but was denied with an unsatisfying answer. Let us try again and tell SRAM what their best paying customers need.
Remeber, it is a question of time until Shimano will follow with an alternative product...
This idea has been raised before. Prepare for SRAM to tell you that you all bikes should be in perfect condition at all times and so it’s not necessary in a very condescending manner.