SRAM AXS Mobile
Welcome to the feedback portal for SRAM AXS App. We want to hear your feedback!
- We will email you with updates on your feedback and/or requests.
- You can change your preferences in Settings if you would not like to be contacted.
223 results found
-
Add Wahoo Remote Control Functionality
For 1x setups and/or connected Blips, add the possibility to remote control a Wahoo (or other brand) device from the eTap levers or Blips. E.g., it should be possible to switch screens on the device by simultaneously pressing both paddles.
21 votes -
Report Slope in ride files
Report the factory and current sloped in .fit files for eSports purposes. Mediators need to verify that your power numbers are legitimate and this data will help do that.
1 vote -
Force RD MAX 36 T Actuation Counter
Der Counter funktioniert nicht mehr, wahrscheinlich nach dem Update auf 2.0.3
1 vote -
Allow updates to AXS components from a Windows PC via WiFi &/or Bluetooth.
I find updating components a bit flaky when using Android, might just be my Samsung tablet though? But an alternative method would be good too.
23 votes -
[ShockWiz] Better descriptions for compression settings in profiles
I think it’ll make a lot of sense to add “FROM OPEN/CLOSED”, “SOFT/FIRM”, or “CW/CCW” in the compression settings for suspension profiles. Currently the only option is “from slow/fast” which makes sense for rebound but not so much for LSC and HSC.
4 votes -
3 votes
-
Change language Spain
does not switch to spanish language
1 vote -
Provide ANT+ connection to BOSCH Nyon for sram axs status
It would be really great, to get the status informations like gear setting (1-12) battery charge axs, other parameters via ANT+ to the BOSCH cycle computers like Nyon, or other devices via ANT+ signal. Another feature I would like to have, is to have the status informations stated above on my android smartsphone with Locus Map 4 app via ANT+
Thanks for your support, Peter5 votes -
1 vote
-
Keep Drivetrain Setting when battery is removed/replace un AXS Eagle
it's frustrating having to set it up every time the battery is changed
5 votes -
5 votes
-
After 1000 shift, battery indicate full. Strange ?
My Garmin Edge 1000 indicate the battery level with symbol and 5 grey bar. Is it normal that all bar is grey or should have green bar for level indication ? % should be better.
3 votes -
Allow multiple Buttons to be programmed for same shift operation
One of my bikes has an Eagle AXS and a Reverb AXS controller and I would like to program the total of three buttons (2 for Eagle one, 1 for Reverb) to be programmed for shifting up and down either combination I want.
However, I cannot.
I can program the both Eagle buttons to shift one way and the one Reverb button the other way. I can program ONE of the two Eagle buttons to shift one way and the one Reverb one the other way.
I CANNOT program one of the Eagle buttons one way, the second Eagle button…
5 votes -
Add disconnect from device option in app
Add an option to disconnect your phone from an axs device. Right now to get your phone to release a connection you have to kill the app on Android.
3 votes -
ayuda para enlazar sran red con la aplicacion
buenos dias , hace 4 dias compre una bici con grupo sram red y no puedo enlazarla con la aplicacion por que me sugiere una actualizacion de firawalle , pero al intentar actualizar me dice "esto es vergonzoso y no puedo " me gustaria recibir ayuda para solucionar este inconveniente.
2 votes -
Shifter low battery notifications when new batteries installed
My shifter batteries were low so I replaced them. Once replaced I went into the AXS App, woke the components up and it showed these as being full. I went for my ride the next day and once completed I received notifications to say the shifter batteries are low. I once again logged into the app and it shows the batteries as full but I still get notifications to say that the shifters are low after every ride. Anyone else have this issue?
18 votes -
Allow the option to Save/Select different bike/trainer drivetrain profiles
Technically, you could use the AXS drivetrain with most 9, 10, 11, 12 spd drivetrains. I had to adjust my AXS XX1 rear derailleur for my Wahoo Kickr(16). When I hit the trails, I now have to adjust it for my frame/wheel combo. The app should allow profiles that can be setup and applied per setup.
5 votes -
Add the Hammerhead Karoo (V2) to supported devices
Add the Hammerhead Karoo (V2) to supported devices in addition to garmin and wahoo. The Karoo is rapidly gaining market share and ideal for exploring new grounds. For me personally having insights on my gravel bike would be great
13 votes -
Avoid shifting when waking front derailleur
When waking components, everytime I wake the front derailleur, by pushing the button, the derailleur shifts automatically without needing it to do so, and forcing the chain a bit in the process. Would be good if derailleur remains in position while waking it.
50 votes -
Front and Rear Derailleur shift summary
In the Component Summary section of the SRAM AXS app the numbers for the rear derailleur seem rather high, i.e. 159 shifts on a 90 minute ride !? The front derailleur numbers seem to be quite accurate.
2 votes
- Don't see your idea?