SRAM AXS Mobile
Welcome to the feedback portal for SRAM AXS App. We want to hear your feedback!
- We will email you with updates on your feedback and/or requests.
- You can change your preferences in Settings if you would not like to be contacted.
-
Allow me to add a bike withouth a mandatory picture
As the title says.. I am not sure why I have to take/use a photo of a my bike to add it to the app.. not everyone has pictures of their bikes around nor do I want to provide a picture of what I have to a 3rd party unless necessary.. and I do not see the 'necessity' for a picture to be provided to configure the groupset.
2 votes -
AXS App wattage does not go to zero when not pedaling
The wattage reported in the AXS App does not go to zero when you stop pedaling.
2 votes -
Auxilary Buttons not free Programmable
I got myself some Blips and wanted to ad a Downshift Button to the right side, so that i can shift up with the normal lever, and additionaly shift down with my right "thump Blip" so basicly as a one hand Operation. But i can not set the auxilary ports on my Force that way. It only accepts so that either the Blip will be my only Downshift Button, or to set the Aux Buttons on both sides the Same function as the normal Button. In this case i´d need to get Extreme long blips and run them from one…
2 votes -
The search icon is not very straight forward.
It’s small and the magnifying class with the AXS symbol makes me think that it is for something else.
8 votes -
I want to be able to use the app even without cell connection - especially Tyrewiz
Team -
Just coming back from a week riding in Moab, where I didn't have cell connection most of the time. Without cell service, the app stays blank, meaning it won't show my bikes. As a result, I'm not able to connect to my Tyrewizes and check my exact tire pressure. There are times when just checking the blinking light is not enough.
Is there a chance to make the app content based on the phone, and not on the cloud?3 votes -
In the app it is not possible to set the number of teeth of the front cassette - I mean front chainring. The rear cassette can select the 10
In the app it is not possible to set the number of teeth of the front cassette - I mean front chainring.WHY NOT FORWARD?
The rear cassette can select the 10-26 Teeth, 10-28 Teeth or 10-33 Teeth cassette option, but not forward ??.2 votes -
Avoiding chain x over
When the front derailer changes in auto it would be great if I could pick when the front derailer would change along the cassette instead on the second top cog on the cassette it would be better if it changed in the middle of the cassette
3 votes -
2 votes
-
Simple way to make faster changes
I ride in sequential mode and do not require the option to change the front gear independently with a simultaneous press of both levers. I would like the app to be able to remove the function of the levers to always be trying to detect a simultaneous lever press. In doing so the gear would change as soon as one lever is pressed rather than waiting for a short time. This would make changes slightly faster for pure sequential mode users.
3 votes -
Tire Pressure
TyreWiz allows you to "set" a target but SRAM AXS does not.
3 votes -
hours run counter added to the app
total time ridden in app
3 votes -
Tyrewiz: accommodate two settings for each wiz.
User story:
I change surfaces (pavement/gravel/singletrack) on all my long rides, often changing tire pressure when I do so. The primary benefit to me would be the ability to quickly change pressures when I change ride type. e.g. ride pavement to trails, drop tire pressure, then re-inflate after trail riding. I would prefer to select a predetermined settings rather than adjusting targets.5 votes -
Blip Shift Logic in App
I added blips to my Red setup and found that I am able to lose hood shifter function when I change the logic on my blips. For example, I have a left side blip that I want to downshift (up the cassette), but it is plugged into the right shifter which is setup to upshift (down the cassette). When I go into the app to change the logic, it is possible to change the blip shifting to downshift, but then the logic for the hood shifters gets erased. I totally understand that the blip plugged into that shifter might only…
4 votes -
Collapse MY BIKES to only show bikes -- Click to expand the parts list.
It would be nice to see the list of all bikes, and not have to scroll through each bikes list of a bikes parts to see the next bike.
Bike One
Bike Two
v Bike Three
"AXS" Drivetrain
PM
TyreWiz
Bike Four5 votes -
Problem pairing parts
Couldn't pair my AXS parts together
4 votes -
Finding where tire pressure suggestions are after pairing to TyreWiz is way more difficult than in should be.
It is not intuitive, feels like there should be a Settings or some area that is about tire pressure
5 votes -
Set Two Shifter action to specific gear (on 1x Setup)
Define the two shifter action on a 1x setup to a specific gear. Set the two shifter action to a Specific gear for take off from a start, or race/drop four gears, or gear 1 for climbing... the goal is to let the user set the two shifter action to what gear they want to use it for...
Thanks!
2 votes -
Support for multiple wheels
Store micro adjustment setting for different wheel sets where the cassette location might be slightly different
4 votes -
Allow the “bump” or knuckle button to have unique control over either up or downshift separate from the top paddle.
Allow the “bump” or knuckle button to have unique control over either up or downshift separate from the top paddle.
2 votes -
Maximize the App
To include monitoring for speed, elevation, temperature and others, including location of the ride in maps and others
2 votes
- Don't see your idea?