Chainring data are incorrect
My data for at least one ride are showing I was in the small ring the whole time when I was definitely in the big ring the whole time.
This issue will be resolved on all Garmin Edge xx30 series cycling computers with Garmin’s impending release of new firmware. The beta firmware is available here:
530: https://www8.garmin.com/support/download_details.jsp?id=14953
830: https://forums.garmin.com/sports-fitness/cycling/f/edge-830/213939/new-edge-830-public-beta-5-26-now-available
1030: https://forums.garmin.com/sports-fitness/cycling/f/edge-1030/213938/new-edge-1030-public-beta-9-26-now-available
-
rusp191@gmail.com commented
This is the same for my rides. Just looked at a flat ride where I was definitely in the large chainring for most of the ride.
-
christophe@suzor.net commented
The chart with the gear usage shows only 11 gears for 10-50 usage chart, while I know that I used all 12 gears. I believe the chart is somehow limited to only 11 gears and ignores the data for the 12th gear.
-
sram@ivssolutions.com commented
I previously posted that the time spent in the 35 vs the 48 tooth on the front was reversed. It turns out that the same is true in the back. I have the 10-33 cassette and the time in each gear is backwards. My last ride has me in the 10 for 2 minutes and the 33 for 15 minutes when the opposite is true. The time in the 35 and 48 are still reversed. The data is correct when shown on the Garmin 830 display during the ride.
-
jm.hoevenberg@gmail.com commented
Same issue
-
sjamesbrown@gmail.com commented
I'm also not getting any small/large data
-
brurho@icloud.com commented
I am only seeing the 33 chain ring of a 33/46 combination. Only one chain ring showing. Garmin 1030
-
kulbis@gmail.com commented
Same here- shows small ring for the entire ride. Not correct.
-
jimdilullo@gmail.com commented
On my ride today I Experience the same thing today. I rode in the big ring the entire ride and it recorded 90% of the ride in the small ring.
-
lbailey@bak.rr.com commented
For cassette 33-10, I don't see any activity for the 10 cog. The values seem to be shifted up one cog. I have a value under 33 cog which I never used. I have 46-33 chain ring. My head unit is Edge 1030. And the values for chain ring and cassette are not retained in the selection.
-
brurho@icloud.com commented
Shows that I was in same chain ring for whole time; definitely in each for part of the time
-
info@suriabicis.com commented
Input custom size and then change auto. Also I ride more time with big ring and show a little ring
-
toast1927@yahoo.com commented
I have a 48/35 front chainring. My Garmin 1030 accurately shows what gear I’m in. However the AXS app only shows me in the 35 for the entire ride. Any ideas?
-
sram@ivssolutions.com commented
I have the exact same issue.
-
tripp0090@gmail.com commented
Same
-
sram@ivssolutions.com commented
I have the exact same issue. The count of the changes was also incorrect. It shows one change from small to large in each ride when I definitely changed more than that.
-
bergziege21@gmail.com commented
The same for mein!
The cogs are Show on axs Web not correct!
Garmin 830 -
lbailey@bak.rr.com commented
Using Edge 1030, the front gear time is wrong, my large ring only showed 35 seconds should have been more like 35 minutes.
-
smeuleman@telenet.be commented
I ride with 46/33 gear rings but the AXS web shows time ridden on 46 chain ring as 33 and time ridden on 33 as 46.
-
mendonsa.ricardo@gmail.com commented
olá, a minha actividade foi feita no prato 48t e no site aparece 35t. Cumprimentos
-
richard.bregazzi@gmail.com commented
Same problem - 100k ride only showed one change on big ring ... garmin display was correct during ride though 🤷♂️
Also didn’t display all 12 usage of rear cassette in the axs data when I reviewed post ride.