SRAM AXS Web
Welcome to the user feedback forum for SRAM AXS Web. Please share your ideas for how we can make AXS web better. We are listening and we use this feedback to prioritize our roadmap!
- We will email you with updates on your feedback and/or requests.
- You can change your preferences in Settings if you would not like to be contacted.
289 results found
-
Support of BLE Battery service 0x180F
It would be great if you can support the org.bluetooth.service.battery_service UUID 0x180F. This is a standard BLE battery profile. This could help to get infos about the current battery level.
4 votes -
Garmin MTB Dynamics
Garmin has introduced MTB Dynamics which include metric for flow, grit and jumps. It would be awesome if these metrics could be transferred to AXS Web so alone with the gear selection it could be possible to see the flow and grit rating, along with the locations for jumps, including jump length as well as hang time as displayed in Garmin Connect.
4 votes -
Elevation Gain is not shown in the AXS data that is synced from Garmin Connect, why is this?
Elevation Gain
4 votes -
strava connect and gangster protection
connect app with strava.
build a warning into the app to alarm when the bike is used whilst parking or allow the devices to be tracked during theft.4 votes -
Other activies that such from AXS should not be loaded form Garmin connect. E.G. data form stepper training.
When I connected SRAM AXS Web with Garmin connect, all activities form Garmin connect has been loaded, even such form the forerunner form my stepper training. This activities has Nothing to do with SRAM AXS, I would suggest that this data are not loaded to SRAM AXS web or that you can choose if it should be loaded or not.
4 votes -
AXS training
Hr/power based training with automated shifting to maintain hr/power.
4 votes -
Maybe add a page to the AXS feed for shockwiz data and suggestions
Add page for shockwiz Data and suggestions for tuning, would also give a good data point for shock pressures and rate of loss etc......
4 votes -
Shorter Cranks for Force and RED
Rival is offering already 160mm cranks, would be good to have 160mm and 155mm in Froce/RED family with the 8-bolt chainring mount.
For shorter people that do triathlons, this would be a great advantage.
3 votes -
An update in FD please so it can change a few mm the position according the rear gear selection like shiman.
Its not normal for the front derailleur to stay in the same position when i have 2/12 and 2/1. It sould be moved 1-2mm so the chain doesn't touch the inside of the FD. It would be very useful and shimano does this long time ago
3 votes -
Bitte auch Lezyne Computer unterstützen
Es fehlt an Unterstützung für Lezyne Computer
3 votes -
System settings are lost when removing derailleur battery
When removing the deraillieur battery for charging all the settings for multishift, sequential shifting and the controller buttons are lost. The settings for micro adjust are being kept nevertheless.Also battery status of the controller(s) ist not shown anymore on my Garmin device after removing and charging the battery.
Battery status of the controller/s) will be displayed again on the Garmin device after reassigning all system components to the deraillieur. After turning the Garmin device off and on again battery lveels of the controllers won't be displayed just like before.3 votes -
quarq power meter disappeared from web app
I have a Quarq Power Meter added to my bike setup but I get "Component Not Found" when I click on it. It is not listed on the "My Components" page either.
Moreover, there are no release notes for Quarq Power Meter. There is only Quarq Dub Power Meter listed under "Power Meter" in release history.3 votes -
Introduce shift lever transmit timeout/switch off eg 2 seconds, for if the bike accidentally rests on a shift lever when parked badly. This
Introduce shift lever transmit timeout/switch off eg 2 seconds, for if the bike accidentally rests on a shift lever when parked badly. This will prevent battery drain in the shift lever and mech (rear mech is probably enough as front mech shift normally needs both levers transmitting which is unlikely to happen)
3 votes -
Provide approximate RPM data
It's a fairly simple equation. But if a user with just a garmin or wahoo computer and no power meter is able to enter their wheel circumference, then they could see their rpm.
(Distance ÷ (wheel circumference x gear ratio) ) ÷ time = RPM
I realise it won't be accurate for sections when freewheeling downhill.
3 votes -
Microadjust
En mí app de sram axs, en la parte de microadjust no permite modificar NADA. Vi los tutoriales y se puede regular .25mm para mejorar las regulaciones. Pero en mí app no me deja modificar NADA DE NADA. Aguardo pronta respuesta
3 votesIn app MicroAdjust for MTB RD's is not available yet, it will be included in the next firmware release.
-
Add shift delay
Add shift delay option to the app (.5 sec?) so you have to hold the shifter for a brief moment before a shift command is sent to the derailleur. This would prevent 99% of my accidental shifts and rule out the one negative design element in my opinion.
3 votes -
Axs gx allow us to select 10 and 11 speed cassette sizes
Can you sort this out in software. Most of us don't need eagle but want wireless. My bike works fine with a 10 speed or 11 speed cassette. Nothing fancy to do. 😁
3 votes -
retire bikes to not show up in app
When a bike is marked as retired then it should not show up on the dropdown menu for bikes or in the SRAM AXS app
3 votes -
Assign opposite shift to blip
Allow the right shifter to be assigned to shift up the rear cassette while the right blip (connected to right shifter) does a shift down the rear cassette and the opposite on the left sided. Basically allowing either single hand to be able to shift up and down the rear cassette as needed. My integrated aero bars would ruin their clean look by running longer blips all the way across where there is no tape. I am routinely drinking or eating while riding and have to try to tap the shift lever with my bottle or without dropping my food…
3 votes -
New firmware for GX AXS controller does not show voltage any more
After updating the firmware to 2.3.0 as recommended by the app, the battery indicator does not show the voltage any more. Still waiting on the % indicator though.
3 votes
- Don't see your idea?